Tips Overcoming Car Suddenly Broke Down On The Way

The car broke down - How to troubleshoot car broke down on the way and a distarter hard to live? What would you feel if in the course of driving the car suddenly broke down in the middle of the road, would certainly be very annoying especially if car repair shop has a location far from where your car broke down. But you don't go on a late-in-the dumps because the car broke down aka stops suddenly while on a trip and the car distarter will not turn on is actually also many experienced by users of the car. Although before the car will be used for menepuh travel that far, they've done the preparation so that no experienced car stopped on its own.

For that you need to know there are three main components that have an important role in the system of car engines, which are suppliers of power, ignition, and fuel suppliers. The car can not be automatically turned on or often known as strike will occur if there is one part of these three components were damaged. Perhaps for people who understand very well about the car's engine, he won't be confusion when experienced it because he knows the cause of the car crash arrive arrive to fix it. In contrast to those who are still novices or lay about the ins and outs of car engines, naturally they will not understand how to fix the car broke down on the road.

Therefore this time Otomotif Tips will try to share knowledge about how to resolve the crashing car couldn't distarter. So you do not need to be confused how to push a car striking matic if you already know the cause of the car crash suddenly so that these problems can be overcome. For it let's just begin discussion tips overcome the sudden strike cars in the course of which we already write down in full below.

Tips Overcoming Car Suddenly Broke Down On The Way

The steps you did to overcome a car broke down in the middle of the road is :

1. Position your car in a safe place.

• The first step if your car broke down in the middle of the road was pushed to the curb where a safe place from passing by a passing vehicle. Place generous can give you space to check your car broke down.

2. Do the inspection on the part of the power suppliers.

• The reason why we first have to check the power suppliers because suppliers of power components being the important part which serves to turn on the car's engine. Prinsil power suppliers work almost the same with aki, becomes the first to ignite the engine power car 12 volt battery voltage will be used as the high voltage coil by up to tens of thousands of volts, after that it will be in the high voltage forward toward the spark plug to the ignition by distributors as well as CDI or Platinum. So if a problem occurs on battery and coil components can cause the car engine becomes difficult is turned on.

For it how to fix a car crashing on the components of the power suppliers are:

• First-check the connection to the tama headgear on aki then make sure the connection is not closed or loosened rust.
• Then do pengecheckan on the coil wires to make sure the cable is loose or loosened its State.
• When aki you're having come up short should immediately do charge on your battery or replace with battery (accu).

3. Check on the ignition.

• After you perform the inspection on Power suply parts and already you make sure there is no damage, the next step is to check on the ignition. Ignition part that we need to make sure the lack of damage was on the component distributors, CDI or Platinum, as well as the spark plugs. Spark plug for inspection of the car, you can simply unplug each spark plug in a car's engine and do cleanup in each businya.

4. Make sure the fuel suppliers in good condition.

Components that serve as the fuel pensuplai is the carburetor (if you are using a car that still use Carburetors) and petrol stations. A problem that often occurs on the carburetor of a car usually occurs because the carburetor most gasoline or petrol shortages.

How to resolve problem on karbulator are :

• First-tama by opening the air filter from the carburetor and then let it open first, then turn on the machine without stepping on the gas pedal.
• When the car's engine hasn't been alive then stepping on the gas pedal in deeply then starter/turn on the machine again.

To perform checks on the pumps you can do the following :

• Off the fuel hose and insert the hose end into the bottle after that your car's starter.
• The pumps can be said to have a function that is not good if the fuel does not flow smoothly.